DISASSEMBLY INSTRUCTIONS
1-5: DECK SHIELD PLATE (Refer to Fig. 1-5) 1. Remove the 2 screws 1. 2. Remove the Deck Shield Plate in the direction of arrow (A). 3. Remove the screw 2. 4. Remove the Bottom Shield Plate in the direction of arrow (B).
1
Deck Shield Plate
1-7: JACK PLATE AND SYSCON PCB (Refer to Fig. 1-7) 1. Remove the screw 1. 2. Remove the 2 screws 2. 3. Remove the Syscon PCB in the direction of arrow.
Syscon PCB
1 1
(A)
2 2
TV/VCR Block
(B)
Deck Holder
Fig. 1-7
Bottom Shield Plate
2
Fig. 1-5
1-6: DECK CHASSIS (Refer to Fig. 1-6) NOTE Do not remove the cable at the FE Head section. The FE Head may be damaged if you remove the cable by force. 1. Remove the screw 1. 2. Remove the FE Head. 3. Remove the 3 screws 2. 4. Disconnect the following connectors: (CP1001, CP4001, CP4004 and CP4005). 5. Remove the Deck Chassis in the direction of arrow.
2 2
