TOSHIBA VTV1403S
Manual de Usuario

3. AUTO SET UP
What is Auto Setup � The AUTO SET UP feature makes installing your TV/ VTR easy. It automatically searches and tunes all available TV Stations and stores them in your TV/ VTR, it then sets the correct time and date. � During power failure or disconnection of the mains lead, the clock and all its programmed setting will remain in the memory for 30 minutes. If the power failure is longer than 30 minutes you will have to reset the present time.

1.

Make sure an aerial lead is connected from your household aerial or cable box (if you subscribe to a cable service). Plug your TV/VTR into a mains socket.

2.

Press MAIN POWER ( ) switch on the TV/VTR. The STANDBY ( ) indicator on the TV/VTR lights.

3.

Press ON ( ) button on the TV/VTR. The STANDBY indicator on the TV/VTR turns off. "AUTO TUNING" appears on the screen. Your TV/VTR is now automatically tuning in all available TV stations and setting the correct time and date. If the desired TV stations could not be preset, set the channels manually. See step 5. If the clock could not be set, set the clock manually. See step 4. and buttons on the TV/VTR together for

NOTE: To re-start AUTO SET UP, press and hold CHANNEL more than a few seconds.

4. MANUAL CLOCK SETTING
This clock is based on a 24-hour digital display. To set the present time, turn the TV/VTR on.
COUNTER RESET ZERO RETURN INDEX SUB PAGE ENTER/ HOLD ATR REVEAL CANCEL/ F/T/B

PROGRAM

SP/LP

1. Press the MENU button. Press the or button to select the CLOCK SET mode, then press the ENTER button.

1, 3
PLAY

2. Press the or button to set the desired day, then press the button.
FF

REW

1

2, 3 1

MENU

STOP

PAUSE/STILL

3. Using the or and buttons, set the month, year, hour and minute in the same way above step 3. Finally, press the ENTER button. (For further details, please read page 10 on the instruction manual.)

REC/OTR

TIMER REC

5. MANUAL TUNING
This TV/VTR can receive up to 80 channels and the channels can be changed to any sequence you desire as follows. 1. Turn on the TV/VTR.
COUNTER RESET ZERO RETURN INDEX SUB PAGE ENTER/ HOLD ATR REVEAL CANCEL/ F/T/B

2. Press the MENU button. Press the

or

PROGRAM

SP/LP

button to select the CH TUNING mode, then press the ENTER button. 3. Press the or button. The TV/VTR will search for a channel automatically. Then press the ENTER button. 4. Press the or button to select the channel to be preset, then press the ENTER button. 5. Press the MENU button to return to normal TV screen.

PLAY

3 2, 5

REW
MENU

FF
PAUSE/STILL

2, 4

STOP

REC/OTR

TIMER REC

(For further details, please read page 11 on the instruction manual.)
5A51307D U

5A51307D

2

06/04/2004, 5:12 PM