PIONEER VSX-D810S-G/BXJI
Manual de Servicio

VSX-D810S

Display
1
SIGNAL SELECT

2

3

4 56 7 8

9

0

-

=

DIGITAL DTS ANALOG DIGITAL

DIGITAL SB PRO LOGIC DSP
DNR

ATT DIRECT MIDNIGHT LOUDNESS

MONITOR

SP AB TUNED MONO STEREO

dB

@
1 SIGNAL SELECT indicators Light to indicate the type of input signal assigned for the current component (see �Front Panel�, 0 SIGNAL SELECT). When the AUTO setting is being used on VSXD810S receivers a set of brackets will appear around the SIGNAL SELECT indicators. 2DIGITAL : Lights when a DOLBY DIGITAL signal is played. DTS: Lights when a source with DTS audio signals is played. ANALOG : Lights when an analog signal is selected. DIGITAL : Lights when a digital audio signal is selected. [ ]: Lights when the AUTO setting is selected. 2 DTS indicator Lights when DTS mode is being used. 3 2 DIGITAL indicator When the 2 (DOLBY)/DTS mode of the receiver is on, this lights to indicate playback of a Dolby Digital signal. However, 2 PRO LOGIC lights during 2 channel playback of Dolby Digital. 4 2 PRO LOGIC indicator When the 2 (DOLBY)/DTS mode of the receiver is on, this lights to indicate playback of a Dolby Pro Logic source. 5 DSP indicator Lights when any Advanced Theater or DSP mode is selected. 6 Surround Back indicator Lights when most Surround Back channel flag encoded (6.1channel) software is playing. (With some Surround Back channel software the surround back indicator won�t light because there is no flag encoded in the software.) If you play DTS 5.1/6.1 channel software surround sound will be heard whether it is encoded with a surround back channel flag or not. 7 OVERLOAD indicator This lights when an analog signal is too strong (the SIGNAL SELECT needs to be on ANALOG). It indicates the sound is distorting and the input signal should be reduced. 8 ATT indicator Lights when ATT is used to attenuate (reduce) the level of the input signal (can only be used in ANALOG mode).

!

~

9 DIRECT indicator Lights when source DIRECT is in use. This function bypasses all tone, channel levels, DSP and Dolby Surround effects. MIDNIGHT indicator Lights when MIDNIGHT listening mode is in use. LOUDNESS indicator Lights when the LOUDNESS is on. LOUDNESS is used to boost the bass and treble when listening at low levels. 0 SPEAKER indicator Shows if the speaker system is on or not. SP 3A (and/or) B means speakers are switched on. SP 3 means speakers are switched off. - MONITOR indicator Lights when MONITOR is selected to hear a recording as it's being made. = TUNER indicators
MONO:

Lights when the mono mode is set using the MPX MODE button.
TUNED:

Lights when a broadcast is being received.
STEREO:

Lights when a stereo FM broadcast is being received in auto stereo mode. ~ MASTER VOLUME LEVEL Shows the overall volume level. Volume level is maintained even when the power is off. ---dB indicates the minimum level, and 0dB indicates the maximum level. � Depending on the level settings you make for individual channels, the MAX level can range between �10dB and 0dB. ! DNR indicator Lights when the digital noise reduction is on. Use to reduce extraneous noise. It can be used with any sound mode. @ CHARACTER display Shows the radio frequency or function (DVD/LD, CD, etc.) receiver is using.

74