|
Usuarios conectados
Actualmente hay 6023 visitantes y 20 usuarios online.
|
Productos
|
Información
|
Destacado
|
|
|
|
|
No hay comentarios de productos.
VSX-D711-K, VSX-D711-S
Display
1
SIGNAL AUTO SB DIGITAL DIGITAL ANALOG DTS
2
3
4
5
6
7
8
9
RFATT EON TUNED RDS SP AB
10
Neo:6
DIGITAL PROLOGIC ADV.SURR.
ATT DIRECT MONITOR Re-EQ MIDNIGHT STEREO LOUDNESS MONO
dB
11
12
13
14
15
16
17
1 SIGNAL SELECT indicators Lights to indicate the type of input signal assigned for the current component: AUTO Lights when AUTO signal select is on SB (VSX-D811S only) Depending on the source, this lights when a signal with surround back channel encoding is detected. DIGITAL Lights when a digital audio signal is detected. 2 DIGITAL Lights when a Dolby Digital encoded signal is detected. ANALOG Lights when an analog signal is detected. DTS Lights when a source with DTS encoded audio signals is detected. 2 DTS When the Standard mode of the receiver is on, this lights to indicate decoding of a DTS signal. 3 2 DIGITAL When the Standard mode of the receiver is on, this lights to indicate decoding of a Dolby Digital signal. 4 2 PRO LOGIC II When the Standard mode of the receiver is on, this lights to indicate Pro Logic II decoding. 5 ATT Lights when INPUT ATT is used to attenuate (reduce) the level of the analog input signal. 6 DIRECT Lights when source direct playback is in use. This function bypasses all tone, balance, Advanced Surround, and Dolby Surround effects. 7 MIDNIGHT Lights during Midnight listening.
8 MONITOR Lights when MONITOR is selected. 9 RF ATT Lights when the RF ATT is on. 10 EON and � The � indicator lights to inform you that the currently tuned station carries the EON data service. When the EON mode is set, the EON indicator lights, but during actual reception of an EON broadcast the EON indicator will flash. RDS Lights when an RDS broadcast is received. 11 Character display
12 Neo:6 (VSX-D811S only) Lights during NEO:6 processing 13 ADV. SURR (Advanced Surround) Lights when one of the Advanced Surround modes has been selected. 14 LOUDNESS Lights when LOUDNESS has been selected. 15 TUNER indicators
STEREO: Lights when a stereo FM broadcast is being received in auto stereo mode. MONO: Lights when the mono mode is set using the MPX button. TUNED: Lights when a broadcast is being received. 16 Master volume level Shows the overall volume level. ---dB indicates the minimum level, and �0 dB indicates the maximum level. Depending on your level settings for each channel, the maximum level can range between �10 dB and �0 dB. 17 Speaker indicator Shows the speaker system currently in use.
81
|
|
|
> |
|