PIONEER VSXD508
Manual de Servicio

VSX-D508

8. PANEL FACILITIES AND SPECIFICATIONS
8.1 PANEL FACILITIES
Front Section
1 2 3 4 56 7 9 0 8 ~!@#$ ^

AUDIO/VIDEO MUL TI-CHANNEL RECEIVER

VSX-D508
MASTER V OLUME

ST ANDBY

CLASS ST ANDBY/ON

MEMORY

MPX MODE

DSP MODE

�

ST TION A

+

TUNING SELECT

SIGNAL SELECT

MIDNIGHT

� FREQUENCY +

DO WN

UP

SPEAKERS A PHONES B

B ASS

TREBLE

�

+

�

+

LOUDNESS

DIRECT VIDEO INPUT VIDEO L A UDIO R

VCR

D VD/LD

TV/SA T

VIDEO

CD

FM/AM

MD/T APE 1

MONIT 2 T APE OR

D VD 5.1CH

&

*

(

)

=

_

1

STANDBY/ON button
Press to switch the receiver on or put in standby.

- TREBLE (+/�) button
Used to adjust high frequencies in the range of ±6.

2 STANDBY indicator
Lights when the receiver is in standby mode. (Please note that this receiver consumes a small amount of power (2.5 W) during the standby mode.)

= DIRECT button
Switches direct playback on or off. Use to bypass the receiver�s tone control circuitry or level control for higher fidelity to the program source. When DIRECT is ON, Dolby, DSP, LOUDNESS and MIDNIGHT mode are automatically turned OFF.

3 CLASS button
Press repeatedly to switch the preset station classes.

~ Remote sensor 4 MEMORY button
Press to memorize a preset station. Point the remote control toward the remote sensor to operate the receiver.

! 5 MPX MODE button
Press to switch between auto stereo and monaural (�MONO�) reception of FM broadcasts. When the broadcast signal is weak, selecting �MONO� will improve the sound quality.

button
Press to select the (Dolby) sound mode. This mode automatically switches between Dolby Digital and Dolby Pro Logic decoding according to the input signal.

@ SIGNAL SELECT button
Use to select input signals for the digital components. First press DVD/LD, TV/SAT, MD/TAPE 1, CD or VCR (( Function buttons) to select the component, then press SIGNAL SELECT repeatedly to select one of the following: ANALOG : Selects the analog (R and L) audio signals. DIGITAL : Selects the digital audio signals. This receiver automatically detects and displays the format of the signal being input. AC-3 lights when Dolby Digital signals are input, and DTS lights when DTS signals are input. (AC-3 and DTS decoding is switched automatically.)

6 TUNING SELECT button
Press to switch between STATION and FREQUENCY.

7 SPEAKERS (A/B) buttons
Use to switch the corresponding speaker system on or off. To listen to both speaker systems (A and B), press the buttons so that both A and B appear in the display (refer to �Display� ~ Speaker indicators). Only A speakers are available when using surround sound modes.

8 LOUDNESS button
Switches the loudness on or off. Use to raise the level of the low and high frequencies so they can be more easily heard when listening at low volumes.

9 BASS (+/�) button
Press to adjust low frequencies in the range of ±6.

0 Display
60