PIONEER VSX-917V-S/KUXJ/CA
Manual de Usuario

05

Listening to your system

� DIGITAL � Selects an optical or coaxial digital signal. When set to DIGITAL or AUTO, 2 DIGITAL lights when a Dolby Digital signal is input, and DTS lights when a DTS signal is input.

Selecting the multichannel analog inputs
If you have connected a decoder or a DVD player with multichannel analog outputs to this receiver (page 14), you must select the analog multichannel inputs for surround sound. 1 1 Make sure you have set the playback source to the proper output setting. For example, you might need to set your DVD player to output multichannel analog audio. 2 Press DVD/LD.

3 Press SIGNAL SELECT to select the multichannel analog inputs. DVD 5.1ch shows in the display and the ANALOG indicator lights.

Selecting the front audio inputs
When playing back a component connected to the MCACC/AUDIO IN jack on the front panel, set the source to F.AUDIO on the receiver. 1 Press F.AUDIO (SHIFT+DVD) on the remote control. You can also select the source by pressing VIDEO/FRONT AUDIO on the front panel. 2 Playback the connected component.

Note
1 � During playback from the multichannel inputs, you can�t use any of the sound features/modes and only the volume and channel levels can be set. � You can�t listen to your speaker B (Second Zone) system during playback from the multichannel inputs.

34
En