PIONEER VSX-417-K/MYXJ5
Manual de Servicio

5

6

7

8

Display
1

Illustration shows the VSX-817 model

2

3

45

6

7

8 9 10 11 12 13
A

14
1 SIGNAL SELECT indicators Lights to indicate the type of input signal assigned for the current component: AUTO Lights when AUTO signal select is on.

16

17 18 19

20

21 22

9 SLEEP Lights when the receiver is in sleep mode. 10 Tuner indicators / MONO Lights when the mono mode is set using the MPX button.
/ STEREO Lights when a stereo FM broadcast is being received in auto stereo mode.
B

DIGITAL Lights when a digital audio signal is detected. DTS Lights when a source with DTS encoded audio signals is detected.
2 DIGITAL Lights when a Dolby Digital encoded signal is detected.

/ TUNED Lights when a broadcast is being received.

11 EON/RDS indicators EON - Lights when the EON mode is set, and flashes during an EON broadcast. The indicator lights when the current station carries the EON service. RDS - Lights when an RDS broadcast is received. 12 Speaker indicator Shows if the speaker system is on or not. SP A means the speakers are switched on. SP means the headphones are connected. 13 Sound Retriever indicators Light when the Sound Retriever is switched on.

C

ANALOG Lights when an analog signal is detected. 2 Lights to indicate decoding of a DTS multichannel signal. 3 2 DIGITAL Lights to indicate decoding of a Dolby Digital multichannel signal. 4
2 PRO LOGIC II

D

14 Character display

2 PRO LOGIC II lights to indicate Pro Logic II decoding (see Listening in surround sound for more on this).

16 ADV.SURR (Advanced Surround) Lights when one of the Advanced Surround modes has been selected. 17 WMA9 Pro
Lights to indicate decoding of a WMA9 Pro signal.

5 VIR.SB Lights during Virtual surround back processing. 6 DIRECT Lights when source Stream Direct playback is
in use. Stream Direct playback bypasses the tone controls for the most accurate reproduction of a source.

18 MIDNIGHT Lights during Midnight listening. 19 D.E. Lights when Dialog Enhancement is switched on. 20 LOUDNESS
Lights during Loudness listening.

E

7 AUTO SURR. Lights when the Auto Surround feature is switched on (see Auto playback). 8 ATT Lights when ANALOG ATT is used to attenuate (reduce) the level of the analog input signal.

21 EX (VSX-817 model only) Lights when a Dolby Digital Surround EX encoded signal is detected. 22 Master volume levelindicators
F

VSX-417-K
5 6 7 8

87