Setting Up the VCR Plus+ Programming System (cont�d) 33
2
Now, compare the channel numbers you have written into the VCR PLUS+ CH. and CABLE/TV CH. columns. You�ll notice that some stations have VCR Plus+ and Cable/TV channel numbers that are the same, and other stations have channel numbers that do not match. You must tell the VCR Plus+ and Cable/TV channel numbers according to the following steps.
2
Examine the lists on page 32.
3 8 4-7 6-7
TV CBL/DBS
VCR
�
+
POWER
3
Press the VCR button, then press the MENU button.
MENU STILL/SLOW L STOP
cEJECT
EXIT/STATUS
REW ;;
PLAY :
FF /OK :: S.SEARCH
TIMER [REC/OTR
4
Press the PLAY 8 or STOP 9 button to select INITIAL SET UP, then press the FF :/OK button.
1
START
+ �
2
STOP
+ �
3
DATE
CH
5
4
DBS
5
DAILY
6
WEEKLY
7
8
9
VOL
SPEED
0
CLEAR
Press the PLAY 8 or STOP 9 button to select VCR PLUS+ CH., then press the FF :/OK button.
SET VCR PLUS+ CH. VCR PLUS+ CABLE/TV 99 ��� 01 ��� 02 � � � �> ��� 03 ��� 04 ��� SELECT ,9 OR ENTER VCR+ CH. NO. THEN PUSH :/OK TO END PUSH EXIT
VCR/TV
QUICK PROGRAMMING
7;;INDEX ::7 AUDIO/MUTE
6 7 8
While the VCR PLUS+ channel is flashing, press the PLAY 8 or STOP 9 button repeatedly or press the Number buttons to select a VCR PLUS+ channel number. The arrow will appear beside the VCR PLUS+ channel. Press the FF :/OK button.
While the space for the CABLE/TV channel is flashing, press the PLAY 8 or STOP 9 button repeatedly or press the Number buttons to enter the CABLE/TV channel number. Press the FF :/OK button. Repeat steps 6 - 7 until you have entered all the channels on your list.
