PHILIPS VRX463AT
Manual de Usuario

32 One Touch Recording
The one touch recording (OTR) function allows you to start an immediate timed recording 30 minutes to nine hours long of the channel you are watching. Before you begin, make sure: � Channels are programmed. Details are on page 12. � The desired recording speed (SP or SLP) has been selected with the (Tape) SPEED button. Details are on pages 36 and 58. � There is a tape in the VCR. Make sure the tape�s record tab is intact (see page five) and the tape is long enough to record the program(s). If the end of the tape is reached during an OTR, recording will stop. The VCR will eject the tape and turn itself off. � The VCR is in VCR position. (The VCR light will appear on the display panel of the VCR when the VCR is in VCR position. If the VCR light does not appear, press the VCR/TV button once.)

1
CBL/DSS VCR POWER PLAY REW FF TV PAUSE/STILL MUTE EJECT EXIT/STATUS STOP
VCR PLUS+/ENTER

F.ADV CLEAR

MENU

Starting an OTR

VOL

JOG/SHUTTLE

CHANNEL

2

1 2 3

Press the VCR button.

Use the CHANNEL Up/Down buttons or the Number buttons to select the channel you want to record.

1 4 7

2 8 5 0
INDEX

3 9 6
GO-TO
MEMO

Press the REC(ord)/OTR button 2 - 19 times, until the desired recording length (30 minutes to nine hours) appears in the

100

3
upper left corner of the screen and on the display panel briefly. The OTR light will flash on the display panel; the REC(ord) light will appear on the display panel.
OTR (0:30) CH 12 SLP

REC /OTR

VAR. SLOW SPEED VCR/TV SLOW TRACKING SKIP SEARCH

REMOTE LOCATOR

Stopping an OTR

To stop an OTR before recording is finished, press the STOP button. To cancel the OTR but continue recording, press the REC(ord)/OTR button until REC appears in the upper left corner of the TV screen. The REC(ord) light will remain on the display panel, but the OTR light will disappear.

Helpful Hints
� To check the time remaining for an OTR after the OTR is in progress, press the EXIT/STATUS button. � To change the recording length while an OTR is in progress, press the REC(ord)/OTR button until the desired length appears on-screen. � If the preset time for a timer recording comes up during an OTR, the OTR has priority. � You may not be able to access the menu during an OTR.