12 Channel Memory
Programming Channels
Although your VCR may automatically memorize the channels you receive when you turn it on for the first time, this function lets you reprogram channels.
POWER EJECT
SLOW
PAUSE/STILL
1 2
�
REW
Press the VCR button.
2
STATUS/EXIT
STOP PLAY
MENU
F.FWD
+
CLEAR
SPEED
MEMORY
REC/OTR
JOG& SHUTTLE
Press the MENU button to bring up the main menu display.
TO SELECT PUSH NO. SHOWN 1 PROGRAM 2 VCR SET UP 3 TUNER SET UP 4 SET CLOCK TO END PUSH EXIT
3
Press the Number 3 button to select TUNER SET UP.
TO SELECT PUSH NO. SHOWN 1 TV 2 CABLE TV ON 3 AUTO PROGRAMMING 4 ADD/DELETE CH 5 CH MEMORY REVIEW 6 TV STEREO ON 7 2ND AUDIO TO END PUSH EXIT
1 4
VCR
TV
CBL/DSS
MUTE
1 4 7
2 5 8 0
3
VOLUME
6 9
CHANNEL
VCR PLUS+ /ENTER
+100
TIME VCR/TV SEARCH
VAR. SLOW
4 5
Press the Number 1 button to select TV (if you have an antenna) or the Number 2 button to select CABLE TV (if you have a cable connection). ON will appear to the right of your choice.
3&5
Helpful Hints
� You can not enter the TUNER SET UP menu when you are in Line Input mode. � Line Input mode will always be stored in the VCR�s memory as channel 001 or 002. When you select channel 001 or 002 with the CHANNEL (Up/Down) buttons or the Number buttons, AV REAR or AV FRONT will appear on the screen briefly. � You may not be able to program channels if you are using a Cable Box/DSS Receiver. See pages eightnine for details. � To switch between TV and CABLE TV selection, repeat the steps on this page.
Press the Number 3 button to select AUTO PROGRAMMING. MEMORIZED CHANNEL / PLEASE WAIT will appear onscreen. The VCR will place all the channels you receive into its memory.
6
Wait for a few minutes while the VCR programs channels. When programming is complete, CHANNELS ARE SET will appear on-screen. Then the programming of the lowest channel number placed in the VCR�s memory will appear on-screen. Now when you press the CHANNEL (Up/Down) buttons, you will scan only through channels you receive.
