ACCESSORIES
Remote control unit (1) RC-R0629(A70-1658-05) AM loop antenna (1) (T90-0893-05) FM indoor antenna (1) (T90-0905-05) Batteries (R6/AA) (2)
CAUTIONS
Resetting the Microcomputer
The microcomputer may malfunction (unit cannot be operated, or shows an erroneous display) if the power cord is unplugged while the power is ON, or due to some other external factor. If this happens, execute the following procedure to reset the microcomputer and return the unit to its normal operating condition. Unplug the power cord from the wall outlet, then plug it back in while holding down the POWER ON/STANDBY key. Please note that resetting the microcomputer will clear the contents of the memory and returns the unit to the state it was in when it left the factory.
Memory back-up function
If the power supply to the receiver is shut down for about a day or more, the following settings will be reset to the initial conditions. Please be careful. Power mode = OFF Volume level = - 66 dB Dimmer level = OFF (Brightest condition) Broadcast band = FM Frequency setting = 87.50 MHz Tuning mode = AUTO Listen mode setting = STEREO Input selector settings = TUNER TONE ON/OFF = OFF LOUDNESS ON/OFF = OFF BASS BOOST ON/OFF = OFF
