|
No hay comentarios de productos.
Important programming notes
� � When recordings have been programmed, k appears in the display. The programmed recording will always be made at the recording speed (SP/LP) that at the time has been selected on the video recorder. You cannot operate the video recorder manually while a programmed recording is being made. If you want to interrupt the programmed recording, press the STANDBY m button. If the video recorder is switched on a few minutes before a programmed recording is due to take place, �TIMER RECORD� will flash on the TV screen. If the end of the cassette is reached during a programmed recording, the video recorder automatically ejects the cassette. If you forget to load a cassette, after programming the recording, �NO CASSETTE� will appear on the TV screen for a few seconds. If you insert a cassette with erase protection, after programming the recording, �PROTECTED CASSETTE� will appear on the TV screen for a few seconds. The cassette will then be ejected. When, after pressing the TIMER k button �TIMER FULL� appears on the TV screen, all TIMER blocks have been programmed. Then, with the P q or P r button, select the TIMER block you want to adjust or clear. If �CODE ERROR� appears on the TV screen, the VIDEOPlus+ code was incorrect or the date was incorrectly entered. Repeat the entry or end with the STANDBY m button. With programming at daily intervals, the first recording must take place within a week. If �DAILY ERROR� appears on the TV screen, the date was incorrectly entered. Programming at daily intervals can only be used for recordings to be made from Mondays to Fridays inclusive. Programme numbers �E1� and �E2� are provided for programmed recordings from external sources (via the EXT.1 or EXT.2 scart socket).
�
�
�
�
�
�
�
�
�
14
|
