RECORDING
Some general notes for recording
� Recording from external sources: Programme numbers �E1� and �E2� are provided for recording from external sources (via the EXT.1 or EXT.2 scart socket). OTR - recording: If you do not want to record to the end of the cassette, press the RECORD n button again. The display shows at what time the recording will stop. With each subsequent press of the RECORD n button you can
Pq
1 Insert a cassette or switch the video recorder on with the
button.
Pr
2 Use the
or P q button or the 0-9 buttons to select the programme number from which you wish to record, e.g.: �P 01� .
�
BBC1
3 Press the RECORD n button.
add 30 minutes to this time. You can return to the normal recording status by pressing the CLEAR (CL) button.
�
0:00
4 To stop recording, press the
STOP h
Stereo reception: This video recorder can record stereo transmissions. The playback of HiFi recordings has HiFi quality. Erase protection: So that you don�t accidentally delete an important recording, you can remove the special tab (erase protection) on the narrow side of the cassette with a screwdriver or slide the special tab to the left. Later, if you no longer want the cassette to be erase protected, you can seal the gap again with adhesive tape or slide the special tab to the right.
button.
�
Long play function
You can reduce the recording speed by half. This makes it possible to record, for example, 8 hours instead of 4 hours on an �E240� cassette. Before recording, with the video recorder switched on, select the �LP� (=LongPlay) recording speed by pressing the SP/LP button. �LP� will appear in the display. Note: During picture scanning, still picture and slow motion colour playback may be poor. * You will obtain the best picture quality when recording at standard speed (�SP�). �
Auto-assembling: You can use the auto-assembling function to join individual recordings without any major picture disturbance between the recordings. During playback, search for the correct position on the tape and then press the STOP h button. 9 will appear in the display. Now you can start recording as usual by pressing the RECORD n button. During Stop h or Pause 9 you can switch between the display for TV-channel name and tape position, using the OK button.
