30 Playing
Read and follow these steps to play a tape.
1
Turn on the TV and set it to channel 3 or 4 __ the channel to which the CH3/CH4 switch on the back of the VCR is set.
1 2 6
Turn on the TV. Insert a tape in the VCR.
MENU STATUS /EXIT CLEAR SMART PICTURE
2
Insert a tape in the VCR. The PWR., VCR, and Cassette-Inside lights will appear on the display panel. If the tape�s record tab is missing, playback will start automatically.
EJECT
POWER
1 4 7
MEMORY
2 5 8 0
3 6 9
ALT.CH
3
If playback does not start automatically, press the VCR button, then press the PLAY/o button.
3 4
REC /OTR
4 5 6
PLAY
PAUSE /STILL
5
CH. VCR
REW
F.FWD
STOP
VOL. MUTE CBL /DBS
Press the STOP/p button to stop playback.
TV
Press the REW(ind)/{ button to rewind the tape.
VCR/TV
SPEED VCR PLUS+ /ENTER
F.ADV
X2 PLAY
SLOW
TRACKING TIME INDEX
VAR.SLOW REC END SKIP
Press the EJECT button to remove the tape.
SEARCH
S-VHS Quasi Play Back (SQPB)
This unit has a SQPB function that allows you to view a tape you recorded in S-VHS format. An S-VHS format tape will play the same as a normal format tape. This unit automatically detects whether the tape is in S-VHS format or in normal format. When you play an S-VHS format tape on this unit, you can not get the high resolution that would be available on an S-VHS VCR. Noise lines (black and white streaks) may appear on the picture.
Helpful Hints
� If the tape you want to play is already in the VCR, make sure the VCR power is on and the VCR is in VCR position. (The VCR light will appear on the display panel. If it does not, press the VCR/TV button once.) Press the VCR button, then press the PLAY/o button. � Other playback options and features are on pages 44-57. � If REPEAT PLAY is ON, playback will begin automatically when you insert a tape, even when the record tab is intact. (However, playback will not begin if the VCR power is off and a timer recording is set.)
