PHILIPS VR621CAT99
Manual de Usuario

30 Recording
Read and follow the steps below to record a television program.

1
Turn on the TV and set it to channel 3 or 4, whichever channel the CH3/CH4 switch on the back of the VCR is set to.

1 2 6

Turn on the TV. Insert a tape in the VCR.

2
Insert a tape with its record tab intact in the VCR.

EJECT POWER MENU STATUS/EXIT CLEAR

1 4 7
MEMORY REC /OTR

2 5 8 0
PLAY

3 6 9
PAUSE /STILL ALT.CH

3
Press the VCR button.

4 5 6 7 8

If the VCR light appears on the display panel, go to step 5. If the VCR light does not appear, press the VCR/TV button once.

REW

F.FWD

STOP

8 7 9 5

CH. MUTE VCR/TV VCR

VOL.

Press the SPEED button until the desired tape speed appears briefly on the screen. (Details about tape speed are on page 35.)

3 4

SPEED TIME SEARCH TV CBL/DBS ENTER SLOW

Use the CH(annel) o/p buttons or the Number buttons to select the channel to be recorded.

Press the REC(ord)/OTR button once to start recording. The REC(ord) light will appear on the VCR display panel.

Helpful Hints
� If you press the REC(ord)/OTR button when there is not a tape in the VCR, NO CASSETTE will flash on the screen. � If you press the REC(ord)/OTR button while a tape without a record tab is in the VCR, the VCR will eject the tape and PROTECTED CASSETTE CANNOT RECORD will flash on the screen. � Other recording options are on pages 31-37. � You can change the tape speed during a recording, but some distortion will appear on the tape. � The VCR will record in a preset volume.

To pause the recording, press the PAUSE/STILL button once. The REC(ord) light will flash. To resume recording, press the REC(ord)/OTR button or press the PAUSE/STILL button again. The REC(ord) light will come on again.

9
To stop recording, press the STOP/p button.