How to check or change a programmed recording (TIMER)
a Switch on the TV set and select the programme number
The programmed recording will only function when the video recorder is switched off with the STANDBY m button. D If any of the TIMER blocks are in use, �k� will light up on the video recorder display. D While a programmed recording is being made, you cannot operate your video recorder manually. If you want to cancel the programmed recording, press the STANDBY m button. D If the video recorder is switched on a few minutes before a programmed recording is supposed to begin, �TIMER RECORD� will flash on the TV screen. D If you reach the end of the cassette during a recording, the video recorder will automatically eject the cassette. D If you forget to load a cassette, �NO CASSETTE� will appear on the TV screen and �k� will flash on the video recorder display. D If you have put in a cassette which cannot be used for recording, the video recorder will automatically eject it. D If �TIMER FULL� appears on the TV screen when you press the TIMER k button, you have used up all the available TIMER blocks. If you want to clear or check a programmed recording (TIMER block), select it with the qP or P r button. D Programme numbers �E1� and �E2� are for recordings from other sources (through scart socket EXT.1 AV 1 or EXT.2 AV 2 ).
for the video recorder.
b Press the TIMER k button on the remote control twice. c Select the programmed recording (TIMER) you want to
check or change with the
d Press the TIMER k button.
qP
or
Pr
button.
e Select the entry field with the D or C button. f Change any information with the P r or qP button or
with the
0-9
buttons.
g Confirm with the OK button. h Make sure that the cassette you have put in can be
recorded on. Switch off with the
STANDBY m
button.
D The programmed recording will only function when the video recorder is switched off with the STANDBY m button. D The video recorder will always record the programmed recording at the speed you have selected before the recording starts.
How to clear a programmed recording (TIMER)
a Switch on the TV set and select the programme number
for the video recorder.
b Press the TIMER k button on the remote control twice. c Select the programmed recording (TIMER) you want to
clear with the
Pr
or
qP
button.
d Press the CLEAR (CL) button. e Confirm with the OK button.