Recording 27
Read and follow the steps below to record a television program.
1
Turn on the TV and set it to channel 3 or 4, whichever channel the CH3/CH4 switch on the back of the VCR is set to.
1 2 5
Turn on the TV.
Insert a tape in the VCR.
EJECT
2
MENU
POWER STATUS/EXIT CLEAR
Insert a tape with its record tab intact in the VCR. If playback begins, press the VCR button, then press the STOP/p button to stop the tape.
1 7 4
MEMORY
2 8 5 0
3 9 6
ALT.CH
3
If the VCR/TV light appears on the display panel, go to step 4. If the VCR/TV light does not appear, press the VCR button, then press the VCR/TV button once.
6 7 8
REC /OTR
PLAY REW
PAUSE /STILL
F.FWD
4
Press the VCR button, then press the SPEED button repeatedly until the desired tape speed appears briefly on the screen. (Details about tape speed are on page 32.)
CH. VCR
STOP
VOL. MUTE
TV ENTER
CBL/DBS SLOW
5
Use the CH(annel) o/p buttons or the Number buttons to select the channel to be recorded.
3 4
VCR/TV
SPEED TIME SEARCH
6 7 8
Press the REC(ord)/OTR button once to start recording. The RECORD light will appear on the VCR display panel.
To pause the recording, press the PAUSE/STILL button once. The RECORD light will flash. To resume recording, press the REC(ord)/OTR button or press the PAUSE/STILL button again. The RECORD light will come on again.
Helpful Hints
� If you press the REC(ord)/OTR button when there is not a tape in the VCR, NO CASSETTE will flash on the screen. � If you press the REC(ord)/OTR button while a tape without a record tab is in the VCR, the VCR will eject the tape and PROTECTED CASSETTE CANNOT RECORD will flash on the screen. � Other recording options are on pages 28-34. � You can change the tape speed during a recording, but some distortion will appear on the tape. � The VCR will record in a preset volume.