D While a programmed recording is being made, you cannot operate your video recorder manually. If you want to cancel the programmed recording, press the TV/STANDBY m button. D If the video recorder is switched on a few minutes before a programmed recording is supposed to begin, �TIMER RECORD� will flash on the TV screen. D If you reach the end of the cassette during a recording, the video recorder will automatically eject the cassette. D If you forget to load a cassette, �NO CASSETTE� will appear on the TV screen and �k� will flash on the video recorder display. D If you have put in a cassette which cannot be used for recording, the video recorder will automatically eject it. D If �TIMER FULL� appears on the TV screen when you press the TIMER button, you have used up all the available TIMER blocks. If you want to clear or check a programmed recording (TIMER block), select it with the P q or P r button. D Programme numbers �E1� and �E2� are for recordings from other sources (through scart socket EXT.1 AV 1 or EXT.2 AV 2 ).
h Make sure that the cassette you have put in can be
recorded on. Switch off with the
TV/STANDBY m
button.
D The programmed recording will only function when the video recorder is switched off with the
TV/STANDBY m
button.
How to clear a programmed recording (TIMER)
a Switch on the TV set and select the programme number
for the video recorder.
b Press the TIMER button on the remote control twice. c Select the programmed recording (TIMER) you want to
clear with the
Pr
or
Pq
button.
d Press the CLEAR (CL), y button. e Confirm with the OK button.
How to check or change a programmed recording (TIMER)
a Switch on the TV set and select the programme number
for the video recorder.
b Press the TIMER button on the remote control twice. c Select the programmed recording (TIMER) you want to
check or change with the
d Press the TIMER button.
Pq
or
Pr
button.
e Select the entry field with the D/Sr or C/Sq
button.
f Change any information with the P r or P q button or
