|
|
|
Usuarios conectados
Actualmente hay 5568 visitantes online. |
|
Productos
|
|
Información
|
|
Destacado
|
|
|
 |
|
|
No hay comentarios de productos.
9. Press the MEMORY key to save the data. 10. Similarly, perform steps 1 to 8 with PAL system. 11. Press the MEMORY key to save the data. 3-3-2-2. SUB-CONT, HUE and COLOR (Component) Adjustment 1. Input the 15k Component 100% Color Bars signal to INPUT-A (pin 5), and select the COMPONENT by the INPUT-A of the SET SETTING. 2. Connect an oscilloscope to TP5024 on the C board. 3. Set the COLOR to 0. 4. Enter the RGB-MTRX on the Device adjust of the menu. 5. Select the item of 08 YUV CONT. Adjust the amplitude for 0.63 Vp-p. 6. Set the COLOR to 50. 7. Select the item of 09 YUV COL. Adjust the � or � key so that the right and left bars are equal in level (A portion). 8. Select the item of 02 SUB HUE. Adjust the � or� key so that the two bars in the middle are equal in level (B portion). 9. Press the MEMORY key to save the data.
<15k Component 100% Color Bars Signal>
A B
8. Select the item of 02 SUB HUE. Adjust the � or � key so that the two bars in the middle are equal in level (B portion). 9. Press the MEMORY key to save the data. 10. Switch the format of 1080/60i to GRB output. Select the DTV-GBR by the INPUT-A of the SET SETTING. Similarly, perform steps 2 to 9.
<1080/60i 100% Color Bars Signal>
A
B
3-3-2-4. SUB-CONT, HUE and COLOR (15k RGB) Adjustment 1. Input the 15k RGB 100% Color Bars signal to INPUTA (pin 5), and select the COMPUTER by the INPUTA of the SET SETTING. 2. Connect an oscilloscope to TP5024 on the C board. 3. Set the COLOR to 0. 4. Enter the RGB-MTRX on the Device adjust of the menu. 5. Select the item of 08 YUV CONT. Adjust the amplitude for 0.63 Vp-p. 6. Set the COLOR to 50. 7. Select the item of 09 YUV COL. Adjust the � or � key so that the right and left bars are equal in level (A portion). 8. Select the item of 02 SUB HUE. Adjust the � or � key so that the two bars in the middle are equal in level (B portion). 9. Press the MEMORY key to save the data.
<15k RGB 100% Color Bars Signal>
A
3-3-2-3. SUB-CONT, HUE and COLOR (DTV) Adjustment 1. Input the 1080/60i 100% Color Bars signal to INPUTA (pin 5), and select the DTV-YPbPr by the INPUT-A of the SET SETTING. 2. Connect an oscilloscope to TP5024 on the C board. 3. Set the COLOR to 0. 4. Enter the RGB-MTRX on the Device adjust of the menu. 5. Select the item of 08 YUV CONT. Adjust the amplitude for 0.63 Vp-p. 6. Set the COLOR to 50. 7. Select the item of 09 YUV COL. Adjust the � or � key so that the right and left bars are equal in level (A portion). 3-2
B
VPL-VW10HT
|
|
|
> |
|
