4. RM-P2580U(A) Controller
RM-P2580U(A) Controller controls the following model. RM-P2580U(A) < A.SEQ tab >
Camera Shift buttons Position Shift buttons
[AUTO SEQUENCE] ON: Enable the auto sequence function. OFF: Disable the auto sequence function. [CAMERA] Select a camera (from 1 to 8) to display its image. (No image will be shown if the selected number is not attached to any camera.) Click Camera Shift buttons to change the camera number to the next or previous. (Unattached numbers to any cameras are skipped.) [POSITION] Select one position to make the camera to point to the registered position. The valid position is from 1 to 99, or HOME. (No image will be shown if the selected position number is not registered on the camera.) Click Position Shift buttons to change the position number to the next or previous. (Unregistered numbers to any positions are skipped.) [PAN/TILT Adjustment buttons] Arrow buttons are provided to control the pan/tilt position of the camera. The camera position is returned to the home position by [HOME] button. [SPEED] (For PAN/TILT Adjustment) Set the speed of the panning/tilting. (1 is the slowest setting, and 8 is the fastest setting.) [SPEED] (For ZOOM and FOCUS) Set the speed of FOCUS and ZOOM. (1 is the slowest setting, and 3 is the fastest setting.)
PAN/TILT Adfustment buttons
[IRIS] Adjust the camera iris. CLOSE: Close the iris. OPEN: Open the iris. [FOCUS] Adjust the focusing. NEAR: Focus on the near subjects. FAR: Focus on the far subjects. AUTO FOCUS: Adjust the focusing automatically. [ZOOM] Adjust the zoom ratio. WIDE: Wide angle TELE: Tele angle
< A.PAN tab >
[AUTO PAN] ON: Enable the auto pan function. OFF: Disable the auto pan function. [AUTO PTL] ON: Enable the auto patrol function. OFF: Disable the auto patrol function. 7
