SHARP VN-EZ1S
Manual de Servicio

VN-EZ1U
Color temperature Low High Low High Low High Within standard Within standard Within standard Compensation value Low Low High High Within standard Within standard Low High Within standard Address 1F5 (B) \ "Down Fixed Fixed 'Up "Down 'Up "Down 'Up Adjustment end Address 1F6 (R) | Fixed "Down 'Up Fixed 'Up "Down "Down 'Up Adjustment end

VN-EZ1S/H/E

4-2-4. EEPROM INI (initial) method
Apply this when EEPROM is replaced or the version of the microcomputer is increased. �Adjustment preparation and check items Before entering the initial screen of the test mode, insert the smart medium in which data is already written. Moreover, check the version.
Initial screen of TEST MODE TEST MODE Version display V```````
`````

Screen of EEPROM INI (PRO) EEPROM INI V``````` `````

Screen of EEPROM INI EEPROM INI V``````` `````

Screen of EEPROM INI (ALL) EEPROM INI V``````` `````

INI (PRO) ## OK? Press of shutter button

INI (ALL) ## OK? Press of shutter button

a) PRO (protect) mode Rewrite the other data except the white balance setting, TFT setting and clock with the data in the smart medium.1) The initial screen of the test mode is displayed. 1) The initial screen of the test mode is displayed. 2) Press the | key to display EEPROM INI screen. 3) Press the \ key to display INI (PRO) screen. 4) Press the shutter button to rewrite the data with the data in the smart medium. In approx. 1 second, it will automatically return to EEPROM INI screen. 5) Press the MENU key, and it will return to the initial screen of TEST MODE. Then turn off the power to complete the setting. 6) Perform steps in �4-1-2. Return of user setting to default setting�. 7) Then turn off the power to complete the setting. b) ALL mode Rewrite all data of EEPROM with the data in the smart medium. 1) The initial screen of the test mode is displayed. 2) Press the | key to display EEPROM INI screen. 3) Press the | key to display INI (ALL) screen. 4) Press the shutter button to rewrite the data with the data in the smart medium. In approx. 1 second, it will automatically return to EEPROM INI screen. 5) Perform steps in �4-2-3. Method of adjusting the LCD display� and �4-2-5. Camera (CCD white balance) adjusting method�. 6) Press the MENU key, and it will return to the initial screen of TEST MODE. Then turn off the power to complete the setting. 7) Perform steps in �4-1-2. Return of user setting to default setting�. 8) Then turn off the power to complete the setting. ~Use the smart medium, FD adaptor or PC card which is copacked or optional.

4-4