Operations (Step 4 Setting with V.Networks Controller) 4-6 Frame Rate
With [V.Networks Controller], it is possible to set the frame rate, the number of image updates per second, for JPEG. Frame rate setting with [V.Networks Controller] is possible only for JPEG. Frame rate for MPEG4 can be set with [V.Networks Setup Tool]. (� Page 38)
1. Select [Setting] and [Framerate].
2. Set the frame rate in the [Frame Rate] screen.
Sets the maximum number of images per minute that are sent from VN-C10. This value is set to �15� at the factory.
Note The actual number of frames received and displayed per second is affected by factors such as the PC performance and the image compression rate as well as the LAN environment. In the case of a LAN environment where multiple operations are being performed at one time (particularly where the network traffic is always heavy), reduce the number of frames to be transmitted. Caution Frame rate for local recording cannot be set with [V.Networks Controller]. It is only possible with [V.Networks Setup Tool]. (� Page 32)
