Self recording with reversed grip
Available mode: Tape Camera
3
Open the LCD monitor to a 90° angle to the camcorder body (1), and then rotate it 180° vertically (2).
90�
Rotate the grip 90° and the LCD monitor 180° vertically so that you can record yourself while holding the grip.
180�
4 5 6 1
Turn the camcorder downward as shown below.
Set the Media Selection switch to V. Set the Power switch to v. Begin recording.
2
Rotate the lens section 90° vertically as shown below.
Notes: � Do not rotate the monitor section to the self recording position during recording or playback. � During self recording, the mode or menu screen cannot be displayed. � All of the manual settings are set to AUTO and some other settings will set to OFF in self recording. � You may experience image noise when using self recording. � To operate self recording with reversed grip correctly, make sure to turn the grip and the lens section so that the Start/Stop button and the tripod socket face upward, and the lens faces toward you. The I indicator will appear. � Be sure that the LCD monitor rotation is exactly 180°, otherwise the image recorded will be rotated 180° upside-down. � In self recording with reversed grip in Card Camera mode, the still images will be recorded rotated 180° upside down. The J indicator will appear in this case. � The viewfinder does not work in self recording with reversed grip.