SHARP VL-AX1E
Manual de Servicio

VL-AX1S/H/E/EW/EX
3.
� Detach the 3 main=sub FPCs (1, 2 and 3) and 1 microphone connector. � Remove the 1 screw ((R)XiPSN17P03000) and 2 screws ((N)XiPSF17P02000), and pull out the sub PWB in the direction of the arrow.
(R) Sub PWB

Microphone connector (N)

(N)

Main=Sub FPC

4.
� Detach the lens FPC, focus FPC, and camera=main FPC BtoB. � Remove the 1 screw ((R)XiPSN17P03000), raise the claw, and then pull out the lens section in the direction of the arrow.

Focus FPC Lens FPC

(R) Claw

Camera=Main FPC BtoB

5.
� Detach the head amp=main FPC BtoB, battery terminal FPC BtoB, AV/S terminal unit FPC, and power supply S/S unit FPC. � Remove the 3 screws ((R)XiPSN17P03000). � Pull out the main PWB in the direction of the arrow to detach the VF FPC. (If the main PWB is pulled out by force, the FPC may be cut off. Therefore, pull it our gently.)

(R) Power supply S/S unit FPC (R) (R)

Main PWB

Head amp=Main FPC BtoB Battery terminal FPC BtoB VF FPC AV/S terminal unit FPC

5