2. SPECIFICATIONS
AC Adapter/Battery Charger UADP-0312TAZZ(VL-A15U) UADP-0316TAZZ(VL-A10K/AH30K)
Note: Change of the drum replacing method We have supplied upper and lower drums individually for replacement. However, we will supply the upper and lower drum ass'y only, since the manufacturing location is transferred to a foreign country. For the drum replacing method in the Service Manual of the base models (VL-A10U/UC/UA/UW/T/K/AH30U/UC/T), follow the following procedures. ("5-5-4 Drum and drum base" on pages 20-22).
5. MECHANISM ADJUSTMENT
5-5. MECHANISM ASSEMBLING AND PARTS REPLACEMENT (DISASSEMBLING AND ASSEMBLING)
5-5-4. Drum and Drum base
Drum base Earth spring Fixing screws
<Removing> (1) Drum base (Compatible with both types) Remove the 3 fixing screws to remove the drum base (See Fig. 1).
Upper and lower drum ass'y
Positioning holes
<Mounting> Perform it in reverse order of the drum removal. (1) Drum base Adjust the positioning pins to the positioning holes. Tighten the 3 screws. (2) Drum ass'y Fig. 1 Attach the drum ass'y to the main chassis and tighten the 3 screws. (3) Tape guide Adjust the positioning pins to the positioning holes. Tighten the one screw together with the ground lead wire.
6. ADJUSTMENT OF VCR AND CAMERA
6-1. INITIAL SETTING OF E2PROM IC
6-1-2. IC705 (E2PROM)
When the IC705 has been replaced, make the following settings and adjustments.
Data Address
