FUNAI VIP5000A
Manual de Servicio

Transferring a call
To transfer from the handset to the base unit
You can transfer a call between the handset and base unit without disconnecting the call.

1 Press (INTERCOM) to page the
base unit. The call is put on hold on the handset. After the base unit rings twice, you will be connected automatically. When a person at the base unit answers, you can talk with each other. �INTERCOM� appears on the display of the handset and the INTERCOM lamp on the base unit lights up.

To transfer from the base unit to the handset

1 Press (INTERCOM) to page the handset.
The call is put on hold on the base unit and the handset rings. �** PAGING **� appears on the display of the handset.
(OFF)
(OFF)

INTERCOM lamp

2 Press (INTERCOM) on the
handset. �INTERCOM� appears on the display of the handset and the INTERCOM lamp on the base unit lights up.

2 Press (LINE 1) or (LINE 2)

You can talk between the base unit and the handset.

which is flashing on the base unit to talk to the caller with the base unit. The corresponding line button of the base unit lights up.

(LINE 2) (LINE 1)

3 Press (LINE 1) or (LINE 2)

which is flashing on the handset to talk to the caller with the handset. �TALK� appears on the display of the handset.

(LINE 1)

(LINE 2)

INTERCOM lamp

If no one answers the phone Press (OFF) on the handset.

If no one answers the phone Press (OFF) on the base unit.
Tips � You can receive an intercom call on the handset even when �RINGER� is set to �RINGER OFF�. � If you have accidentally pressed (HOLD) in step 1, just press (INTERCOM) and you will get the same result as by pressing (INTERCOM) only.

Tip You can receive an intercom call on the base unit even when the L1 or L2 RINGER LEVEL switch on the base unit is set to OFF. The base unit will ring at a low level.

Telephone Features

43US

42US

Telephone Features

Having a conference call
Receiving a call while talking
You can talk on two lines at the same time and you can also talk on one line, the handset and the base unit at the same time. If another call comes in while talking, the LINE 1 or LINE 2 button on which another call is coming will flash.

Making another call while talking
You can talk with two parties at the same time using both line 1 and line 2. (Three-way conference)

1 2 3

Press (HOLD). The line in use is put on hold. Press (LINE 1) or (LINE 2), on which another call is coming. Press (CONF) (conference).
Telephone Features

1 Press (HOLD) while talking on
one line. The line in use is put on hold.

Now you can talk to both parties. (Three-way conference)
Note If you do not press (HOLD) in step 1, the first line will be disconnected.

2 Press (LINE 1) or (LINE 2),
whichever is not used.
(LINE 2) (LINE 1) (OFF)

To disconnect the lines during a three-way conference To disconnect both lines at the same time, press (OFF).
To disconnect line 1 and talk on line 2 only: Press (LINE 2). To disconnect line 2 and talk on line 1 only: Press (LINE 1).

3 Dial a phone number for the
second party.

4 Press (CONF) (conference) after
the second party is connected. �CONFERENCE� appears on the display.
(CONF) (HOLD)

To put the lines on hold during a three-way conference Press (HOLD). Both lines are put on hold.
To resume the conversations on both lines: Press (CONF). To resume the conversation only on one line: Press (LINE 1) or (LINE 2), for the line you want. (The other line is kept on hold.)
Tip During a three-way conference, you cannot use �call waiting� service even if you press (FLASH/CALL WAITING) or (FLASH).

Now you can talk to both parties.

(LINE 1) (LINE 2) (OFF)

continued

44

US

Telephone Features

Telephone Features

45US

http://cxema.ru

� 11 �