Mechanical Instructions
4.2.4 Sledge-motor Assy Caution: Never try to align the DVD-Module! ! ! Only the factory can do this properly. Service engineers are only allowed to exchange the sledge motor assy.
VAE8015 / 8020
4.
EN 7
1 1
1
2
CL 26532126_014.eps 191102
Figure 4-3 Sledge-motor assy
1. Place the DVD-Module, with the laser facing downwards, on a soft surface. 2. Remove the three screws [1] that hold the sledge-motor assy, and lift the assy upwards. You can replace it now. 3. If necessary, it is now also possible to replace the sledgerack [2] that is hinged in the sledge assy.
4.3
Re-assembly
To re-assemble the module, do all processes in reverse order. Be sure to: � Sledge-motor assy: Mesh the teeth of the sledge motor and sledge rack properly, during mounting of the sledgemotor assy. � DVD-M: Point the laser up (towards the tray), when you mount the DVD-M in the bracket. � Complete module: Place all wires/cables in their original positions