�Lubricate the groove, the contact surface and the sliding surface of the cam ring with the oil MZ-800S. Then, set the cover ring unit.
Convex section
Cover ring unit
Oil: MZ-800S To groove, contact surface and sliding surface of cam ring
Cam groove
Cam barrel
Fixed barrel
â� Lubricate the groove (3 places), the contact surface and the sliding surface of the fixed barrel #612 with the oil MZ-800S. â�¡ Pass the shutter FPC through the hole of the fixed barrel #612. Fit the convex section of the cam barrel #613 to the cam groove of the fixed barrel #612 and set them to each other.
Oil: MZ-800S To convex section
#613
Oil: MZ-800S To groove, contact surface and sliding surface of the fixed barrel
