TOSHIBA V851UK
Manual de Usuario

RECORDING

SP/LP

COUNT/ TR

C.RESET

CLR/RST

Stopped.

REC

TIMER

EJECT

TXT/TV

Recording a Programme Immediately
Before recording a programme, you must have preset the corresponding station (unless you are recording via an external video source). If you have not done so, refer to pages 16 and 17.

Pictures of external equipment connected to the TV

AV1 (output of the TV) Stopped.
REW PLAY

MENU

FF

Channel selected on the VTR

VTR channel

Ex. VTR channel 1 Continued
SLOW

1
OK

Switch on the television. To monitor the programme being recorded, select the television channel reserved for use with your VTR (or the AV input if used). Insert the cassette on which the programme is to be recorded, with the window visible and the safety tab intact or the opening covered with adhesive tape. Result : The VTR is switched on automatically Select: o The station to be recorded using the CH/TRK (i or j) buttons or o The AV1, AV2, AV3 or AUX source using the INPUT.SELECT buttons or a satellite tuner or external video source Result : The station number is displayed and the programme can be seen on the television. Select the recording speed (SP/LP) by pressing the SP/LP button as many times as required (see page 28). Press two REC buttons on the remote control or REC button on the front of the VTR. Result : The record indicator appears on the television and VTR display. An index is recorded on the tape (see page 53).

STOP

2 3

PAUSE
STILL

1 4 7

2 5 8 0

3
A.DUB

6
SAT.MONI.

VIDEO Plus+

ENTER

9

SAT.CONT.

4

Note: o If the cassette is ejected when you start recording, check that the safety tab is intact or the opening is covered with adhesive tape. o If you reach the end of the tape while recording, the cassette rewinds automatically.

5 6 7

34

To stop recording, press STOP (s) once.

35

RECORDING

2-16 Toshiba
66

Reference Information

RECORDING

66

RECORDING

NexTViewLink Function of this VTR continued
Before contacting the Toshiba after sales service, perform the following simple checks.

Protecting a Recorded Cassette
Video cassettes have a safety tab to prevent accidental erasure. When this tab has been removed, you cannot record on the tape.

TV Picture Record Setting
Picture The VTR records: During recording, if you change the channel or the input mode on the TV, the recording will be : Ext. TV channel 1

Protecting a Recorded Cassette

1
VTR DVD TV
DISPLAY

If you wish to protect a cassette, break off the tab using a small screwdriver. To re-record over a protected cassette (safety tab broken), cover the hole with adhesive tape.

ON/STANDBY

2
Channel selected on the TV If you performed �TV CH DOWNLOAD� (TV stations stored on the VTR and the TV in the same position order If you did not perform �TV CH DOWNLOAD� (TV station not stored on the VTR and the TV in the same position order. AV1 (output of the TV) VTR channel of the same number as the TV
AUDIO INPUT SELECT

CH/TRK

TV VOL

Continued.
1