MOTOROLA V635
Manual de Servicio

Level 1 and 2 Service Manual

Disassembly

3.

Using the disassembly tool, release the housing latch on each side of the phone as shown in Figure 6.

041176o

Figure 6. Removing the rear housing 4. Carefully lift the rear housing away from the front housing and flip assembly.

G

The flip assembly and the front housing can also be removed at this point in the disassembly procedure. 5. To replace, carefully align the rear housing to the front housing and the flip assembly, then press the rear chassis assembly down until the 2 housing catches engage with the corresponding openings on the rear chassis assembly. Press the housings together until the catches snap into place. Replace the 4 transceiver screws and tighten to a torque setting of 1.5 inch pounds. Do not over tighten. Replace the antenna, SIM, battery, and battery cover as described in the procedures.

6. 7.

6809490A75-O

November 16, 2004

25