FUNAI V3S
Manual de Servicio

http://cxema.ru
The adjustment window appears on the screen. picture automatically fills The adjustment bar appears on the screen. Select To
� If you do not want to use AUTO function, select CANCEL in step 4. expand or contract the picture sides � This function is intended for use with a computer running Windows 2 Move the control button up or down to highlight similar graphic user interface software that provides a full-screen SIZE/CENTER and press the control button. picture. It may not work properly the background color is dark or if EX I T : MENU The SIZE/CENTER menu appears on screen. adjust picture width at top of the screen input picture does not fill screen to the edges (such as an MS-

brightness Automatically sizing and centering Adjusting shape of the picture contrast (CONTRAST/BRIGHT) (SIZE/CENTER) the picture (AUTO) (GEOMETRY)

These are signals from This setting is stored in memory for current input signal. You can easily picture fill screen by using The GEOMETRY settings allow you to adjust the rotation and currently selected input connector. SIZE/CENTER menu. shape of the picture.

1 Press the MENU button. The (rotation) setting is stored in memory for all input signals.

The menu appears on screen. 1 Press MENU button. All other settings are stored in memory for the current input

The menu appears on the screen. signal.

2 Move the control button up or down to highlight

. SIZE/CENTER and press 2 Move control button up or down to highlight 1 Press the MENU button.

Then SIZE/CENTER and press control button. The menu appears on the screen. CONTRAST/BRIGHT The SIZE/CENTER menu appears on the screen.

highlight 6 horizontal adjustment, for vertical adjustment. 3 Move button up or down to select GEOMETRY and press the control button.

3 select for 2 Move the control button up or down to highlight

or . (AUTO). Then press control button. The GEOMETRY menu appears on the screen.

4 adjust 3 Move control button up or down to select the

desired adjustment item. contrast 6 ) brightness ( ). Then press centering. Move the control button up or down to select OK. 4 Then press the control button.

OPTION ( ) menu, following CONTRAST/BRIGHT menu adjustment. Then press the control button. appears on screen. This setting is stored in memory for the current input signal.

If you are using the sRGB mode Adjusting size of the picture 4 If you selected sRGB mode in COLOR MODE ( ) of (SIZE/CENTER) Move control button up or down to make the

CONTRAST / BR I GHT

1

Press the MENU button. rotate the picture US

The menu appears on the screen. Notes s RGB

1-5

rightorleftthetosidespictureshift/:

3 Move the control button up or down to select for
horizontal adjustment, or for vertical RESET factory setting levels. Select OK.

shift picture to left or right at top of the You cannot adjust the contrast 6 or brightness ( ) on this DOS prompt). screen. If you want to adjust them, select mode other than sRGB � The displayed image moves for a few seconds while this function is screen in COLOR MODE of the OPTION ( ) menu. performed. This is not a malfunction.

adjustment. Then press control button. 0 reset all GEOMETRY adjustments to the

For more information about using the sRGB mode, see �Adjusting color of the picture (COLOR)� on page 15.

4 Move control button up or down to adjust the
�Resetting the adjustments (RESET)� on page 18.

size. For more information about using the RESET mode, see

12 13