TOSHIBA V241UK
Manual de Usuario

RECORDING

F.ADV

CLR/RST

3

Press the MENU or VIDEO Plus+ button Note : When using the VIDEO Plus+ function for the first time with stored station, the programme number flashes. This one time, you must enter the station number manually by pressing the � or �button. Refer to the following page if : o The programme number or tomes flash o You wish to modify the programme.
VIDEOPLUS
PROG

Record a programme every week on the same day and at the same time

o Press the ¥ or � buttons, until the DAY selection flashes. o Press the � or � buttons, until the W- (Week) value is displayed. followed by the required day. Example : W - SA (Weekly Saturday)

Extend the recording time
PR 1 -----DAY MO 1 ---------------1/JAN MON 21:28 START�STOP V/P 12:00�12:50 SP ON --:--�--:---- --:--�--:---- --:--�--:---- --:--�--:---- --:--�--:---- MENU

CURSOR

CODE ---------

o Press the ¥ or � buttons, until the STOP selection flashes. o Press the � or � buttons to increase or decrease the stop time. o Press the ¥ or � buttons, recording speed selection flashes. o Press the � or � buttons until the correct indication is displayed : � AUTO (Auto Tape Speed Select) : see page 28 � SP (Standard Play) � LP (Long Play)

Select the recording speed

CODE:0-9

OK
VIDEO Plus+
AUDIO

CORRECT:Â¥ END: MENU

�� ¥� DELETE:CLR/RST

4 5 6

If the programme and times are correct, press the MENU button. Press the two TIMER buttons to activate the timer. If you wish to turn the timer off any reason simply press the two TIMER buttons again. Refer to page 29 if you wish to : o Check that your VTR has been programmed correctly o Cancel a preset recording Select VPS/PDC

VIDEO

o Press the ¥ or � buttons, until the V/P selection flashes. o Press the � or � buttons until the ON or �-� indication is displayed. Note : Do not select VPS/PDC unless you are sure the programme you wish to record is broadcast with VPS/PDC ON (by selecting �ON� in the right hand column on the screen), then you must set up the start time EXACTLY according to the published TV schedule. Otherwise the timer recording won�t take place.

Note: The numbers next to each TV programme listing are VIDEO Plus+ code numbers, which allow you to programme your videorecorder instantly with the remote control. Tap in the VIDEO Plus+ for the programme you wish to record.
VIDEO Plus+ is a trademark of Gemstar Development Corporation. The VIDEO Plus+ system is manufactured under licence from Gemstar Development Corporation.

26

27

RECORDING

2-12 Toshiba
66

Reference Information

RECORDING

66

RECORDING

System Recording
Before presetting your VTR : � Switch on both the television and your VTR � Check that the date and time are correct � Insert the cassette on which the programme is to be recorded (safety tab intact). Up to six programmes can be preset.

System Recording
continued
If you wish to correct the programme displayed or modify certain elements, such as the recording speed, you can do so before you press MENU a second time to confirm.

VIDEO

System Recording

Modifying

VIDEO

Programming

1

Press the VIDEO Plus+ button. Result : A message is displayed to allow you to enter the VIDEO Plus+ code. Note : If all six programmes have been set, the message TIMER IS FULL is displayed. Refer to page 29 if you wish to cancel a preset recording.

If you wish to...
Select an input source other than the tuner (AV1 or AV2)

Then...
o Press the ¥ or � buttons, until the PR selection flashes. o Press I.SELECT button one or more times to change the input source selection. Result : The programme number is replaced by : � A1 or A2 for a satellite tuner or external video input (used by another VTR for example) The input source must be selected before changing any other value.

2
COUNT.RST

Press the numeric buttons to enter the code opposite the programme that you wish to record in your television magazine. Note : If you wish to correct the VIDEO Plus+ code that you are entering. o Press the ¥ button until the digit to be corrected is cleared. o Enter the correct digit

Note : Record a programme every day (Monday to Sunday) at the same time

o Press the ¥ or � buttons, until the DAY selection flashes. o Press the � or � buttons, until the DLY (Daily) value is displayed.