JVC UX-K50R
Manual de Usuario

4 Set the on-time you want the unit to
turn on at.
1) Press 4 or ¢ to set the hour, then press SET. 2) Press 4 or ¢ to set the minute, then press SET. �OFF TIME� appears for 2 seconds, then the unit enters off-time setting mode.
SET

Using Sleep Timer
With Sleep Timer, you can fall asleep to music. You can set Sleep Timer when the unit is turned on.

How Sleep Timer actually works
The unit automatically turns off after the specified time length passes.

5 Set the off-time you want the unit to
turn off (on standby) at.
1) Press 4 or ¢ to set the hour, then press SET. 2) Press 4 or ¢ to set the minute, then press SET. The unit enters preset station selecting mode.

On the remote control ONLY:

1 Press SLEEP.

SLEEP

The time length until the shut-off time appears and the SLEEP indicator starts flashing on the display. � Each time you press the button, the time length changes as follows:
SLEEP10
(Canceled)

SET

SLEEP20

SLEEP30

SLEEP60

6 Select the preset station.
1) Press 4 or ¢ to select the band (�TUNER FM,� �TUNER MW,� or �TUNER LW�), then press SET. 2) Press 4 or ¢ to select a preset channel number, then press SET. The REC (recording timer) indicator stops flashing and remains lit. The settings you have done are shown on the display in sequence for your confirmation.

OFF

SLEEP120

SLEEP90

2 Wait for about 5 seconds after specifying
the time length.
The SLEEP indicator stops flashing and remains lit. To check the remaining time until the shut-off time, press SLEEP once so that the remaining time until the shutoff time appears for about 5 seconds. To change the shut-off time, press SLEEP repeatedly until the desired time length appears on the display. To cancel the setting, press SLEEP repeatedly until �OFF� appears on the display so that the SLEEP indicator goes off from the display. � Sleep Timer is also canceled when you turn off the unit.

SET

7 Press

STANDBY/ON to turn off the unit (on standby) if necessary.

STANDBY STANDBY/ON

ECO

About the recording source If you change the source while recording, the recording source also changes.

Timer Priority
Since each timer can be set separately, you may wonder what happens if the setting for these timers overlaps. Here are some examples. � Recording Timer has priority over Daily Timer. If Recording Timer is set to come on while Daily Timer is operating, Daily Timer is canceled and Recording Timer starts working.
Recording Timer Daily Timer canceled.
6:00 6:30 7:00 7:30

To turn on or off Recording Timer after its setting is done
1 Press CLOCK/TIMER repeatedly until �REC� appears on the display. 2 To turn off the Recording Timer, press CANCEL/DEMO.
CLOCK / TIMER

CANCEL / DEMO

The REC (recording timer) indicator goes off from the display (�OFF� appears for a while). The Recording Timer is canceled, but the setting for the Recording Timer remains in memory until you change it. To turn on the Recording Timer, press SET. The REC (recording timer) indicator lights up on the display. The settings you have done are shown on the display in sequence for your confirmation.
SET

� If Sleep Timer overlaps with another timer (either Daily Timer or Recording Timer), a timer with the earlier shutoff time has priority.
21:00 21:30 22:00 22:30

Sleep Timer Recording Timer canceled.

When using the Recording Timer and Sleep Timer at the same time, pay special attention to the shut-off time.

� 23 �