|
Usuarios conectados
Actualmente hay 5963 visitantes online.
|
Productos
|
Información
|
Destacado
|
|
|
|
|
No hay comentarios de productos.
Continued
� To save the power consumption, make use of Dimmer feature (see page 10). � To switch off the power supply completely, unplug the AC power cord from the AC outlet. STANDBY/ON lamp goes off.
When you unplug the AC power cord or if a power failure occurs The clock is reset to �0:00� right away, while the tuner preset stations will be erased in a few days.
Reinforcing the Bass Sound
The richness and fullness of the bass sound is maintained regardless of how low you set the volume level. You can use this effect only while listening sources. � To get the effect, press ACTIVE BASS EX. button on the remote control, and its indicator lights in the display window. � To cancel the effect, press the button again so that the indicator goes off.
Adjusting the Volume
You can adjust the volume level only while the system is turned on. � Rotate VOLUME dial clockwise to increase the volume level or counterclockwise to decrease it. � Using VOLUME dial, rotating quickly makes a large change in the volume level while rotating slowly makes a step-by-step change. � When using the remote control, press VOLUME + button to increase the volume level or press VOLUME � button to decrease it. The volume level (from 0 to 50) appears in the display window as follows:
Adjusting Bass and Treble Sounds
You can adjust bass and treble sound effects with the remote control, conforming to your preference and acoustic surroundings. You can use this effect only while listening sources.
To adjust the bass
1
Press BASS button. The current level settings shortly appears as follows:
To exit from the level setting, press the button again.
2
For private listening Connect a pair of headphones to the PHONES jack. No sound comes out of the speakers. Be sure to turn down the volume level before connecting or putting headphones.
STANDBY/ON
Press UP/DOWN button to adjust the level. � Press UP button to increase the bass tone level. � Press DOWN button to decrease the bass tone level. The bass level can be adjusted in seven steps from �3 through 0 to +3 (step �0� makes no effect).
To cancel the effect, adjust the level to �0.�
OPEN/CLOSE
MICRO
COMPONENT
SYSTEM
UX-G66
To adjust the treble
FM/AM MULTI JOG AUX
MOS - FET
VOLUME
1
1BIT P�E�M D�D�C O N V E R T E R
Press TREBLE button. The current level settings shortly appears as follows:
PHONES
PHONES jack
COMPACT
DIGITAL AUDIO
DOLBY B NR
REC PAUSE
AUTO REVERSE
REC
To exit from the level setting, press the button again.
2
DO NOT turn off the system with the volume level set to an extremely high level; otherwise, the sudden blast of sound can damage your hearing, speakers and/or headphones when you turn on the system or start playing any source. REMEMBER you cannot adjust the volume level while the system is turned off.
Press UP/DOWN button to adjust the level. � Press UP button to increase the treble tone level. � Press DOWN button to decrease the treble tone level. The treble level can be adjusted in seven steps from �3 through 0 to +3 (step �0� makes no effect).
To cancel the effect, adjust the level to �0.�
12
English
|
|
|
> |
|