Su carrito de compras está vacío
 
English Polski Spanish 
Buscar un manual
 

(p.Ej. AA-V20EG JVC, ZX-7 Sony)
PayPal 1000+ rating Secure, Encrypted Checkout.
 
Usuarios conectados
Actualmente hay 5668 visitantes online.
Productos
Información
Destacado
Inicio >> SHARP >> UX-D50 Manual de Servicio
 
 0 artículo(s) en Su carrito 

SHARP UX-D50
Manual de Servicio


¡Twitee acerca de este producto y obtenga $1.00 de crédito en la tienda para uso!
  • Contiene diagramas del circuito
  • Descargable
  • Formato PDF
  • Manual completo
  • Idiomas: English
Precio: $4.99

Descripción del SHARP UX-D50 Manual de Servicio

Manual de servicio completo en formato digital (archivo PDF). Los manuales de servicio por lo general contienen diagramas de circuitos, tarjetas de circuitos impresos, consejos para reparación, diagramas de cableado, diagramas de bloque y lista de refacciones. El Manual de Servicio (a veces llamado Manual de Reparación) es usado principalmente por los técnicos.

Si tan solo quiere saber cómo utilizar su televisión, reproductor de vídeo, reproductor de mp3, etc. Quizá lo que necesita es el Manual del Propietario. Después de colocar la orden le enviaremos las instrucciones de descarga a su dirección de e-mail.

The manual is available in languages: English

Not yet ready
You must purchase it first

Opiniones de los clientes
No hay comentarios de productos.

TEXT_PDF_SNIPPET
3 Place the cordless handset in the charger with the dial pad facing
forward. � Important! The dial pad must face forward, or the batteries will not charge. � The batteries charges automatically while the cordless handset is in the charger. While charging, the display shows .

6. Loading printing paper

UX-D50DE UX-D50H

You can load up to 50 sheets of A4-size, 60 - 80 g/m 2 paper in the paper tray (at room temperature; maximum stack height should not be higher than the line on the tray).

1 Fan the paper, and then tap the edge against a flat surface to even
the stack.

When charging is finished, the battery icon appears full: � The cordless handset and charger may feel warm while charging. This is normal.

UX-D50DE

UX-D50H

2 Insert the stack of paper into the tray, PRINT SIDE DOWN.
Charge the batteries at least 12 hours the first time! Charge the batteries at least 12 hours the first time!
� If paper remains in the tray, take it out and combine it into a single stack with the new paper. � Be sure to load the paper so that printing takes place on the print side of the paper. Printing on the reverse side may result in poor print quality. � GENTLY LOAD THE PAPER IN THE PAPER TRAY. � DO NOT FORCE THE PAPER DOWN INTO THE FEED SLOT.

� The battery cannot be overcharged. When not using the cordless handset, keep it in the charger to ensure that it is always charged. � When the batteries needs charging, will blink in the display and you will hear beeps during a phone conversation. If you need to continue the conversation, transfer the call to the fax machine or another cordless handset. Place the cordless handset in the charger and let it charge. Note: If the batteries are extremely low, nothing may appear in the display during the first several minutes that the cordless handset is in the charger. The battery will begin to charge normally after several minures. � To ensure that the battery charges properly, wipe the charger contacts once a month with a cotton swab.

The stack should not be higher than this line. (This line is the reference position for the maximum number of sheets. It sheets are above this line, press down with your finger. If the some sheets remain above this line after this, please remove.)

Talking range The talking range of the cordless handset is approximately 200 m (line of sight; talking range may decrease depending on transmission conditions). If you hear noise or interference while talking on the cordless handset, move closer to the fax machine. Large metal objects, metal structures, and thick walls reduce the talking range.

Note: Do not use paper that has already been printed on, or paper that is curled. Note: If at any time the display shows the alternating messages at right, check the printing paper. If the tray is empty, add paper. If these is paper in the tray, take it out and then reinsert it. When you are finished, press
START/MEMORY

Aluminum sash Metal Reinforced concrete

ADD PAPER & � PRESS START KEY

.

1�7

�

Quizás también quiera comprar

$4.99

UXD50 SHARP
Manual de Usuario

Manual del propietario completo en formato digital. El manual estará disponible para descarga como …
>
Parse Time: 0.2 - Number of Queries: 92 - Query Time: 0.048