URS URS A10 SERIES
Manual de Usuario

If your control surface supports plug-in Flip mode try it out with the Classic Console EQs! You might find that you prefer the fixed and finite top-to-bottom mapping of frequency and gain settings along the fader path to the less-intuitive roll-over behavior of most control surface rotary knobs that don t have a fixed range. Flip mode is also convenient for the Classic Console Graphic EQs when rotary knobs are velocitysenstive. Note that you cannot adjust toggle switches in plug-in Flip mode. (See your control surface manual for details on how to use Flip mode).

If you have the full version then you have both TDM and RTAS. You can use our products as either TDM or RTAS.. We mixing we recommend using our plug-ins as RTAS if you need more TDM memory for reverbs and other TDM only plug-ins. We Do Not recommend using our plug-ins as RTAS for live tracking due to the nature of RTAS latency.

If you want to EQ a stereo track, master fader or 5.1 Master fader with one set of EQ controls for both Left and Right or more : 1. Select the insert point on your Stereo fader, Master fader or 5.1 Master fader. 2. From the plug-ins window open the Multi-Mono Mode plug-ins list. 3. Select either the URS A10 series or URS N12 series plug-in. (Multichannel tracks greater than stereo (LCR to 7.1) require Pro Tools HD or MIX.) Use the Link controls for ganged control of all channels (see your Pro Tools manuals for plug-in linking). We think that since the frequencies of both Classic Console Equalizers overlap, using both on a channel can be very powerful. If you are running an HD3 system you will still have plenty of chips left even with 48 URS plug-ins inserted (24 URS A10 series and 24 URS N12 series). We like to insert URS A series first and then insert the URS N series next in the chain. Tell us what you like. Unique Recording Software www.ursplugins.com