Sharpness storage and manual focusing
Sharpness storage is possible in each reception program, except �light reception�. Helpfully with receptions, with which persons or auto cross the picture or if the motive is not in the Suchermitte.
1. Guarantee that one the Custom key
In the special reception programs (sport, Portrait, impact light, sand & snow) the sharpness can be stopped also manually. 1. Zoom it the motive into that desired picture angle. � If after the focusing gezoomt becomes, the reception can become indistinct. 2. Press the Custom key User key �M. FOCUS�, over of Autofocus on manual focus to switch. � AF OFF is indicated in the Sucher. � The sharpness remains on the point, up those adjusted the autofocus. 3. The FexiZone automatic controller to Focusing use. � Press downward for sharpness misalignment forward. � Upward press to sharpness publishing house ring to the rear. 4. The Custom key user key �M FOCUS " will again print over To reset autofocus. Notes: � See �fault finding� on page 48: List that Motives, which are not suitable for autofocus. � Manual focusing is waived, wj nn They the program �light reception� threw, or if it the Programmwähler on EDFT, PLAY or OFF place. � FlexiZone Autofokus is waived, if her the Programmwähler from the position - D>
55 '
User keys set to M. FOCUS is. the motive.
2. Put the Camcorder up directly
� On the motive one focuses automatically. � When using FlexiZone AF the AF
Frameworks over the motive put.
3. Custom key user key �M. FOCUS " press, � The sharpness becomes on this point stored. � AF OFF is indicated in the Sucher.
4. The Custom key user key �M. FOCUS " will again print over To reset autofocus.
