EDIROL UA-3
Manual de Usuario

Connections and driver installation (Windows)

s Using the D-Out Smoother
The D-Out Smoother has an �ON/OFF� switch and a �TEST� button.

�ON/OFF� switch
Normally, you will leave this �ON� when using the digital output of the UA-3. Turn this �OFF� when connecting or disconnecting the UA-3.

�TEST� button
Click the [TEST] button. If the test audio is heard, the D-Out Smoother is operating for that device. When using two or more USB Audio Devices such as the UA-3 or MA-150U, use this button to select the UA-3 for which the D-Out Smoother will operate. Use the following procedure to make your selection. 1. From the D-Out Smoother [Control] menu, select [Setting] to access the Setting dialog box. (This dialog box will appear automatically the first time the software is started up.) 2. From the pull-down menu, select �USB Audio Device� and click [OK]. 3. Click the [TEST] button, and check whether or not the test audio is heard. If the audio is heard, the D-Out Smoother is operating for that device. If the audio is not heard, select a different USB Audio Device in step 2, and repeat steps 1 through 3.

Convenient Features
� When [Register to STARTUP] is checked in the Setting dialog, DOut Smoother will automatically start up when you start up the computer. � When [Minimize window when starting up] is checked in the Setting dialog, D-Out Smoother will minimize itself immediately after it starts up, allowing you to use your computer�s screen more effectively.

s Deleting (uninstalling) the D-Out Smoother
The D-Out Smoother supports the Windows Add/Remove Programs Properties function. You can use the following procedure to remove the program if it becomes unnecessary. 1. Click the Windows [Start] button, and select [Settings] - [Control Panel]. 2. In [Control Panel], double-click [Add/Remove Programs] to open the Add/Remove Programs Properties dialog box. 3. Click the [Install/Uninstall] tab. 4. From the list in the dialog box, click the name of the application that you wish to delete. 5. Click [Add/Remove]. The application you specified in step 4 will be deleted.
If you uninstall D-Out Smoother, you should firstly uncheck the [Register to STARTUP] in the Setting dialog. You can go to the Setting dialog by selecting [Control] [Setting]. (p. 44)

23