PANASONIC TZPCD2000
Manual de Usuario

Programming the Remote Control
Programming Without Code
If you cannot find the right Code, you can call up all Codes one after the other to search for a Code. 1.Turn on the power for the Component to be programmed. 2.Press the mode button (TV, VCR or AUX) for the component to be programmed, and then press the Setup button and hold for 3 seconds (until the visible LED blinks twice). 3.Use the numeric buttons on the remote control to enter �991�. After this number is entered, the LED on the remote control will flash twice. 4.Press the POWER button. (A remote control signal will be transmitted.) 5.If the component turns off, go to step 6. If the component remains on, press the mode button (TV, VCR or AUX), and then repeat step 4. (Repeat this step until the right Code is found.) 6.Press the Setup button to register the Code. When programming is complete, the LED on the remote control will flash twice.

POWER button AUX button VCR button LED TV button

Identifying programmed Codes
If you would like to know what Code has been programmed, you can find out by observing the flashing pattern of the remote control LED. 1.Press the mode button (TV, VCR or AUX) for the component that you would like to find out the Code for, and then press the Setup button and hold for 3 seconds (until the visible LED blinks twice). 2.Use the numeric buttons on the remote control to enter �990�. After this number is entered, the LED on the remote control will flash twice. 3.When a �1� is then entered using the numeric buttons, the remote control LED will flash. The number of times it flashes corresponds to the first digit of the Code. For example, if the LED flashes five times, the first digit of the Code is 5. 4.When a �2� is then entered using the numeric buttons, the remote control LED will flash. The number of times it flashes corresponds to the second digit of the Code. 5.When a �3� is then entered using the numeric buttons, the remote control LED will flash. The number of times it flashes corresponds to the third digit of the Code. 6.When a �4� is then entered using the numeric buttons, the remote control LED will flash. The number of times it flashes corresponds to the fourth digit of the Code. 7.Write the code numbers for your components in the space provided below. This will serve as a reference when you need to program your remote control. Setup button

Name of component
Numeric buttons

TV VCR AUX

(

TV

)

( VCR , DVD player ) ( )

18