However if an external HDTV source causes geometry faults this can be adjusted by means of HDTV 1080i and DTV 480p. PC input The PC connected must have a resolution of 640/480 pixels. Press LIST until the Beo4 display shows PC then press GO. It may be necessary to ADD PC to Beo4 LIST function. In PC mode press 1 1 to be able to make geometry adjustments.
mp ln
Press to move the picture up or down. Press to move the picture left or right. Press to decrease picture height. Press to increase picture height. Press to decrease picture width.
<RED> <BLUE> <GREEN>
<YELLOW> Press to increase picture width. GO Press to store the adjustments
Adjustments after replacing PCB10, Sound Output Read out the adjustment position of the old potentiometers 10R402-10R405 and set the new potentiometers to the same position.
