SHARP TU-32GD1E
Manual de Servicio

TU-32GD1E TU-37GD1E

REMOVING OF MAJOR PARTS
1. Remove the two lock screws from each of the right and left Side Shield, and detach the Side Shield by sliding them backward. 2. Remove the five lock screws from the Top Cabinet, and detach the cabinet by sliding it backward. 3. Remove the five lock screws from the Bottom Cabinet, and detach the cabinet by sliding it backward. 4. Remove the tow lock screws from the Front Panel, and detach the panel. 5. Remove the lock screws and six hexagon shaft screws from the Rear Panel, and detach the Rear Panel. 6. Remove the DVI PWB. 6-1. Remove the revit. 6-2. Remove the four lock screws from the DVI PWB Angle. 6-3. Remove the four lock screws from the DVI PWB.

2 2 Top Cabinet

2 Side Shield (Left) 1

1

6-1
Side Shield (Right)

6-3

DVI PWB 6-2 DVI PWB Angle

5 5
4

SD Cover

Card Cover 5

Rear Panel

Front Panel 3 3

3 Bottom Cabinet

13