RANE TTM57SL
Manual de Usuario

The Software:
Getting started
1) Install the software Mac 1. Insert the Software Installation CD-ROM and double-click the installer icon. Windows XP 1. Insert the Software Installation CD-ROM. If Setup doesn�t start automatically, browse to the CD drive and run setup.exe. Note: Select custom install to change the directory you wish to install Scratch LIVE into. 2. Follow the on-screen instructions. Once the installation is complete, Scratch Live appears in the Start Menu under All
Programs > Serato > Scratch Live.

2) Connect the TTM 57SL mixer Mac Mac users need only connect the mixer after installing the software. No extra hardware installation is required. Windows XP There are two drivers to install. The first is the standard Windows driver that allows you to use your TTM 57SL as a sound card. The second driver allows you to use the TTM 57SL with Scratch LIVE. When the TTM 57SL is connected to the computer with the USB cable for the first time, Windows will recognize it with 'Found New Hardware' bubbles appearing in the taskbar. Wait for it to finish as it loads the default sound card driver. When you see the bubble "Your new hardware is installed and ready to use," proceed to install the Scratch LIVE driver. Installing the Scratch LIVE driver. 4. With the Scratch LIVE installation CD in the drive, run Scratch LIVE. 5. Windows will ask you if you wish to search for drivers on the internet � select �No, not this time�, and click �Next� 6. Choose the �Install the software automatically� option, and click �Next� 7. Windows may warn you that the driver has not been signed. Click �Continue Anyway� 8. Click Finish. TTM 57SL as a sound card The TTM 57SL will be available as a standard Windows sound card whenever Scratch LIVE is not running. It will replace the previous sound card and default to TTM57SL Line 2 (select D 2 on either of the PGM INPUTS). If you wish to change to Line 1 or back to your previous sound card when not using the TTM 57SL: 1. Start > Control Panel > Sounds and Audio Devices. 2. Click the Audio tab. 3. Make changes using the drop menus for both Sound Playback and Sound Recording. 4. Click OK. Tip: Be aware that Windows system event sounds (beeps, dings, etc.) will come through your TTM 57SL when it is your sound card. To prevent embarrassment, have no other applications running. Better yet, turn off your computer�s sound scheme: 1. Start > Control Panel > Sounds and Audio Devices. 2. Click the Sounds tab. 3. Under Sound scheme, change to No Sounds. 4. Click OK.

Manual-