POSITIONING
1
Because low-frequency sound reproduced by the powered subwoofer is mostly non-directional, the listener will be unable to localize the bass source. Accordingly, the powered subwoofer provides maximum flexibility in terms of positioning. For the most
L
,0
$.
,1
If@@
effective low-frequency sound, the powered subwoofer should be placed on the floor close to a wall or in a corner of the room.
CONNECTIONS
Connect the speaker cords before connecting the AC cord. Connect in u way if your stereo system has a SUPER WOOFER output jack. [f not, connect in u way. Never connect in both of
u and u ways
simultaneously.
Ml
\
J
uConnecting
u
m�
.
1
an AIWA stereo system with a SUPER WOOFER or SUB WOOFER output jack (RCA phono jack) to the powered subwoofer
Preparations
Turn off the power of this unit. 1 Connect the SUPER WOOFER or SUB WOOFER jack on the
stereo system side ~ to the INPUT 1 (FROM SUPER WOOFER TERMINAL) jack on the powered subwoofer O with the supplied connecting cord. 2 Set the INPUT SELECT switch to�1�.
u Connecting
a stereo system with typical Land R speaker terminals to the powered subwoofer
u -2,3
-.
Turn off the power of the stereo system and remove the speaker cords from the speaker terminals on the system.
Preparations
1
ID
Connect the stereo system speaker terminals @to the INPUT 2 (FROM SPEAKERS OUT) terminals�on the powered subwoofer @ with the supplied speaker cords 0. Make sure the L and R and the @ and @ cords are connected correctly.
2
Using the speaker
cords
removed switch to �2.
in �Preparations�
above,
Ji2J
0
10 0
3
connect the right and left speakers 6) 0 OUT terminals on the powered subwoofer Set the INPUT SELECT
to the SPEAKERS Q).
Connecting
Connect
the AC cord
the AC cord to a wall outlet.
Use Iefffright speakers whose impedance value specified on the stereo system.
