USING THE AUDIO/VIDEO INPUT JACKS (CONT�D)
S-VIDEO INPUT
The S(uper)-Video connection on the rear of the television can give you better picture detail and clarity for the playback of S-VHS VCR tapes or Digital Video Discs than the normal antenna picture connections. Note: The VCR (or Digital Video Disc player) must have a SVIDEO OUT(put) jack in order for you to complete the connections shown on this page.
BEGIN
24
NOTE: Repeatedly pressing the AV button on the remote will toggle the picture source from the current channel, to the last viewed channel, then the AV 1 connection, then the AV 2 connection. This also applies to the Multi Media button on the remote. Repeatedly pressing the Multi Media button will toggle the picture source from the current channel, to the last viewed channel, then the MM 1 (AV 1) connection, then the MM 2 (AV 2) connection.
When using the S-Video input jack remember that it will take precedence over any video signal coming from the Video IN-1 jack. The signal from the S-Video jack can only be viewed on the AV 1 channel.
BACK OF TV
1
S-VIDEO CABLE (NOT SUPPLIED)
S-VIDEO VIDEO
L
Connect the S-VIDEO CABLE to the S-VIDEO input jack on the rear of the television, then connect the AUDIO (red and white) cables to the AUDIO IN (IN 1) jacks on the rear of the TV. Connect the S-VIDEO CABLE to the S-VIDEO output jack on the accessory device. Then, connect the red and white AUDIO CABLES to the AUDIO (left and right) output jacks on the rear of the accessory device. Turn the VCR (or Digital Video Disc Player) ON. Press the AV button on the remote until you tune to the AV 1 channel. You are now ready to view the tape or disc on the TV.
ANT "A" 75
AUDIO R/MONO IN-1 IN-2 OUT
AV 1
AUDIO IN (RED/WHITE)
AV 2
VIDEO IN (YELLOW)
2
ANT/CABLE OUT
S-VIDEO OUT
R L AUDIO OUT
BACK OF ACCESSORY
4
SLEEP POWER TV AV STATUS/EXIT CC TV/VCR-CLOCK VCR VCR INCREDIBLE MULTI A/CH
3
DBS, DVD, Video Game, etc. (EQUIPPED WITH S-VIDEO AND AUDIO OUTPUT JACKS) IF YOU ARE USING A NON-STEREO DEVICE, USE ONLY THE AUDIO R/MONO JACK.
ACC
RECORD
STEREO
MEDIA
SMART
SMART
SOUND
PICTURE
MENU
SURF
SMART HELP
VOL CH
MUTE
The S-VIDEO and IN-1 inputs are in parallel. The SVIDEO input will take precedence when in use. If separate video signals are connected to the S-Video and VIDEO IN-1 inputs, the signal from the VIDEO IN-1 input will not be useable. If you have added AV 1 to the TV�s channel memory, just press the CHANNEL + or � buttons until the AV 1 mode (channel) is selected.