PHILIPS TS2554C
Manual de Usuario

ON-SCREEN MENU CONTROLS (CONTINUED)
CAPTION
CLOSED CAPTIONING
BEGIN

C

losed Captioning allows you to read the voice content of television programs on the TV screen. Designed to help the hearing impaired, this feature uses on-screen "text boxes" to show dialogue and conversa-

Press MENU (M) button on the remote, then press the CHANNEL v or w (or press the MENU v or w
H C

buttons on the TV) to select the word CAPTION with the TV�s on-screen Arrow.
U MU S T

Press VOLUME (+) or (-) buttons to select the desired Closed Caption (CC) mode For Example: CAPTION 1. Note: Usually �CAPTION 1" is the most used mode to view captioned material.

Press the STATUS button after making your Caption mode selection. The TV display will clear and Captioning

SMART HELP
Remember, not all TV programs and product commercials are made for broadcast with Closed Caption (CC) information included. Neither are all Closed Caption modes (CAPTION 1 or 2) necessarily being used by a broadcast station during the transmission of a closed caption program. Refer to your area's TV program listings for the stations and times of Closed Caption shows.

material (if available on the currently selected TV program) will appear on the TV screen. To cancel, set the CAPTION feature to OFF when finished viewing.

tions while the TV program is in progress. Note: Broadcast stations will often use spelling abbreviations, symbols, dropouts and other grammatical shortcuts in order to keep pace with the on-screen action. These type factors vary upon the source of the captioned text material and do not indicate a need for service on the part of the TV.

T MU

O L V

S U
L S V O H O L C V H
STAT

R

U S U

1
MEN

C V H O

This symbol will appear with channels that contain Closed Captioning material.

CAPTION VOL. BAR EXIT SETUP BRIGHTNESS PICTURE

W

CAPTION 1

6

CAPTION 2 OFF CC W MUTE
JOHN: Why did they move the meeting up to this week? MARSHA: I don't know, but they are pushing to close the deal.

CC

3
1 4
E

PO

W E

2 6

7 8
SM AR

5

3

RF

0
T SLEE P

9

2

NOTE: The �CC W/MUTE� setting automatically switches the TV to the Closed Caption 1 mode whenever the MUTE button (on the remote control) is pressed. The Closed Caption 1 mode will turn OFF when the TV sound is returned or unmuted.

CAPTION 1 or 2 mode: dialogue (and descriptions) for the action on the captioned TV program shows on-screen. (See Smart Help on this page.)

INPUT
AUDIO/VIDEO INPUT JACKS

BEGIN

Y

ou can view the playback of VCR tapes (Video Disc Players, camcorders, etc). by using the AUDIO and VIDEO INPUT jacks (on the rear of the TV).

Connect the VIDEO and AUDIO IN(put) jacks on the TV to the AUDIO and VIDEO OUT(put) jacks on the VCR. Note: The position of your TV�s (left, right) Audio Input Jacks may differ from the drawing on this page. Please be sure the VCR�s (left, right) Audio Output Jacks are matched to the same Input Jacks on the TV.

Press the MENU (M) button on the remote, then the CHANNEL v or w buttons (or the MENU v or w buttons on the TV) to select the word INPUT with the TV�s onscreen Arrow.
PICTURE AND SOUND FROM PLAYBACK OF VCR TAPE

Press VOLUME (+) or (-) button to select the VCR/AUX(iliary) INPUTS on the rear of the TV. Turn the VCR ON and PLAY the VCR tape to be viewed

SMART HELP
Remember, when you're through using the A/V INPUT jacks, return the INPUT display screen on the TV to ANTENNA. If you leave the TV in the VCR/AUX INPUT mode and there is no signal source connected to the jacks, you will be seeing only a blank screen on the TV. NOTE: If you have a mono (single audio OUTPUT) VCR, "Y" Connectors are

1
BACK OF TV
75 ANT / CABLE
VIDEO IN

NOTE: YOU CAN ALSO PRESS THE CHANNEL vw BUTTONS TO SELECT "VCR/AUX" (if it has been added to the TV's channel memory. See the "Add and Delete Channels" section on page 4 for details.

R

INPUT CABLE CHANNEL SLEEP CAPTION VOL. BAR

VCR/AUX

AUDIO IN
L

IN

L

R

2
STAT

VIDEO IN (YELLOW)

(RED/WHITE)

AUDIO IN

MEN

PO

available (from your dealer or Parts Information Center 1 800 292-6066) to connect to the audio inputs on the TV.
R

E R

1 4

E

C

L

2 5 6

3

RF

U

7 8
SMA RT

9

0
SLEE P

RCA PHONO PLUG CABLES (NOT SUPPLIED)

OUT ANTENNA OUT VIDEO ANTENNA IN IN L

OUT

AUDIO

3
3
VCR (EQUIPPED WITH VIDEO AND AUDIO OUTPUT JACKS)

IN

BACK OF VCR

GLOSSARY
Round Cable 75� * A single solid antenna wire normally matched with a metal plug (Ftype) end connector that screws (or pushes) directly onto a 75 Ohm input found on the Television or VCR. (Also known as Coaxial Cable.) Display * An on screen message or graphic that helps the user operate and adjust his Television feature controls. See On Screen Displays (OSD). On Screen Displays (OSD) * Refers to the wording or messages generated by the television (or VCR) to help the user with specific feature controls (color adjustment, programming, etc.). Menu * An on-screen listing of feature controls shown on the Television screen that are made available for user adjustments. Programming * The procedure of adding or deleting channel numbers into the Television�s memory circuits. In this way the Television �remembers�� only the locally available or desired channel numbers and skips over any unwanted channel numbers. Remote Sensor Window * A window or opening found on the Television front control panel through which infrared remote control command signals are received. Status * Allows the user to quickly confirm what channel number is currently being viewed. Status can also be used to clear the Television of on-screen displays or information (rather than waiting for the displays to �time out� or automatically disappear from the screen). Twin Lead Wire * The more commonly used name for the two strand 300 Ohm antenna wire used with many indoor and outdoor antenna systems. In many cases this type of antenna wire requires an additional adapter (or balun) in order to connect to the 75 Ohm Input terminals designed into the more recent Televisions and VCRs.
7 - IB7757 E001