DEASSEMBLY AND REPLACEMENT
1. Removal of the FRONT LOADING Ass�y (Fig. 3.1)
NOTE: Remove the FRONT LOADING Ass�y in eject mode. a. Unscrew the 2 screw holding the F/L. b. Separate the F/L Ass�y from the MAINBASE settling down point by lifting the rear part of F/L (Screw Hole).
2. Deassembly of FRONT LOADING Ass�y (FIg. 3.2~3.5)
a. Remove the 1 washer for holding the door opener and separate F/L Assembly by moving the DOOR OPENER in the direction of arrow. b. Remove the 2 screw holding the TOP PLATE and separate the CASSETTE HOLDER Ass�y by moving the FL BRKT L and FL BRKT R in the direction of arrow. (Fig. 3.2)
Fig. 3.1 Removal of the FRONT LOADING Ass�y FIg. 3.2 Deassembly of the FRONT LOADING Ass�y c. Separate the FL LIFT SPRING by twisting and dragging from FL BRKT R. (Fig. 3.3)