PHILIPS TL960A/00T
Manual de Usuario

4.

RECORDING DIRECTLY
Erase protection
To prevent an important recording from being deleted accidentally, you can remove the erase protection tab on the narrow side of the cassette with a screwdriver. To undo the erase protection, seal the gap again with adhesive tape.

To make a recording, proceed as follows:
1 Insert a cassette. The video recorder will switch on

automatically. You can also switch it on by pressing button hSTOP .
2 To start the recording, press button
nREC.

.

The word �REC� and the current total recording time, e.g.: 2h, will appear in the display on the video recorder. The video recorder will start recording.
3 Stop recording by pressing button hSTOP . 4 Select the total recording time with button $ .

Some general tips: * If you have forgotten to insert a cassette, the display will read �NO CASSETTE�. * If you accidentally try to start recording on a cassette that is erase protected, the word �PROTECTED� will appear in the display. The cassette will be automatically ejected. * If the end of the cassette is reached during recording, the appliance will stop automatically. If you have activated repeat recording (REPEAT REC), the tape will wind back to the beginning. The video will then start recording at the beginning of the tape. * Existing recordings on the tape will be automatically deleted if you make a new recording on the tape.

11