6.38. Remove the S-Board
1. Remove the screws (�2 ) and remove the S-Board unit.
7. Remove the screws (�2
).
8. Remove the G-Board and GH-Board.
2. Disconnect the connector (S2). 3. Remove the screws (�2 ) and remove the S-Board.
6.37. Remove the GS-Board
1. Remove the Speaker box assy (R).(See section 6.8.) 2. Unlock the cable clampers to free the cable. 3. Remove the screws (�2 4. Remove the SD card unit. ).
5. Disconnect the connector (GS52). 6. Remove the screw (�1 7. Remove the GS-Board. ).