No hay comentarios de productos.
TH-50PX60U
6.5.
4. Remove the screws (�5 6. Remove the P-Board. ). ). 5. Remove the molding props (�8
Remove the PA-Board
1. Unlock the cable clampers to free the cable. 2. Disconnect the couplers (PA2, PA5, PA10, PA31, PA32, PA33, PA34 and PA40). 3. Disconnect the flexible cable (PA20). 4. Remove the screws (�4 5. Remove the PA-Board. ) and remove the earth cable.
Note: When assembling the P-Board, the position of each hole of the insulation sheets (A and B) is set to the position of each hole of the P-Board, then assemble them. ( marks indicate setting positions.)
6.6.
Remove the tuner unit
1. Unlock the cable clampers to free the cable. 2. Disconnect the couplers (DG5, G51, GS52, PA40 and earth cable). 3. Disconnect the flexible cables (DG3 and PA20). 4. Remove the screws (�4 ) remove the tuner unit.
9
|