SET UP for Input Signals SYNC
Select SIGNAL from the �SET UP� menu during RGB or PC input signal mode. Press to select each item.
SET UP COMPONENT/RGB-IN SELECT RGB SIGNAL SCREENSAVER OSD LANGUAGE ENGLISH (US) SET UP TIMER
Press
SIGNAL SYNC
R
(ACTION) button
[ RGB ] H&V
H-FREQ. V-FREQ.
31.5 kHz 60.0 Hz
[ PC ] H&V
Press to exit from adjust mode.
SIGNAL SYNC H-FREQ. V-FREQ. 31.5 kHz 60.0 Hz
Setting RGB sync signal:
Confirm that the input is set to RGB INPUT (this setting is valid only for RGB INPUT). H & V: The H and V sync signals are input from the HD/VD connector. ON G: Uses a synchronized signal on the Video G signal, which is input from the G connector. ON VIDEO: The composite video signal input from the VIDEO input terminal is used by dividing the sync signals.
SYNC H&V
SYNC SYNC
ON G ON VIDEO
Setting PC sync signal:
Confirm that the input is set to PC INPUT (this setting is valid only for PC INPUT). H & V: The H and V sync signals are input from the HD/VD connector. ON G: Uses a synchronized signal on the Video G signal, which is input from the G connector.
SYNC SYNC H&V ON G
H-FREQ. (kHz)/V-FREQ. (Hz)
Displays the H (Horizontal)/V (Vertical) frequencies.
This display is valid only for RGB input and PC input. Display range: Horizontal 15.6 - 110 kHz Vertical 48 - 120 Hz
